p ower amplifier RNP04006-A1 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 1 / 6 version 1.0 product features applications ? surface mount hybrid type ? no matching circuit needed ? high efficiency ? high linearity ? psat 4w power ? alumina substrate ? gan on sic chip on board ? rf sub-systems ? base station description gan on sic is used and attached on a board. it is connected by using bias and in/out matching circuit method with gold wire bon ding. electrical specifications @ ta=25 parameter unit min typ max condition frequency range mhz 400 - 450 z s = z l = 50 ohm power gain db 32 33 - @ input 3 dbm input return loss db - -10 -6 - output power dbm 35.5 36 - @ input 3 dbm efficiency % 65 70 - n th harmonic suppression dbc 10 15 - total current consumption drive ma - 90 - - main - 230 - weight g - - 2 - supply voltage v - 4 - drive amp - -3.2 - gate bias - 24 - main bias dimensions (wlh) mm 20 14.5 4.8 * caution : the drain voltage must be supplied to the device after the gate voltage is supplied. package type : hy-6
p ower amplifier RNP04006-A1 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 2 / 6 version 1.0 performance charts * bias voltage condition : pin4. drive amp(+4v) , pin5. gate bias(-3.2v), pin7.main bias(24v), ta=25 output power @ input 3dbm vs. frequency 34 35 36 37 38 39 400 410 420 430 440 450 frequency (mhz) output power(dbm) sn1 sn2 sn3 sn4 power gain @ input 3dbm vs. frequency 30 31 32 33 34 35 36 400 410 420 430 440 450 frequency (mhz) power gain (db) sn1 sn2 sn3 sn4
p ower amplifier RNP04006-A1 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 3 / 6 version 1.0 efficiency @ input 3dbm vs. frequency 64 66 68 70 72 74 76 400 410 420 430 440 450 frequency (mhz) efficiency(%) sn1 sn2 sn3 sn4 2nd harmonic @ input 3dbm vs. frequency -20 -15 -10 -5 0 400 410 420 430 440 450 frequcncy (mhz) 2nd harmonic (dbc) sn1 sn2 sn3 sn4 3rd harmonic @ input 3dbm vs. frequency -30 -25 -20 -15 -10 -5 0 400 410 420 430 440 450 frequency(mhz) 3rd harmonic (dbc) sn1 sn2 sn3 sn4
p ower amplifier RNP04006-A1 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 4 / 6 version 1.0 absolute maximum ratings parameter unit rating operating case temperature c 80 input rf power dbm 5 supply voltage ( main bias ) v 24.5 load mismatch value - 3 : 1 @ all load phase environmental characteristics parameter unit min typ max operating temperature c -40 - 80 storage temperature c -40 - 105 vibration mil-std-810g method 514.6 annex c block diagram input drive amp gate bias main bias output matching circuit input matching circuit output matching circuit
p ower amplifier RNP04006-A1 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 5 / 6 version 1.0 package dimensions (type: hy-6) * unit: mm[inch] | tolerance 0.15[.006] top view side view bottom view pin description pin no function pin no function pin no function pin no function 1 rf input 4 drive amp(+4v) 8 gnd 11 gnd 2 gnd 5 gate bias(-3.2v) 9 gnd 12 gnd 3 gnd 6 gnd 10 rf output 13 gnd - - 7 drain bias(+24v) - - 14 gnd * mounting configuration notes 1. ground / thermal via holes are critical for the proper performance of this device. 2. add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. mounting screws can be added near the part to fasten the board to a heatsink. ensure that the ground / thermal via hole regi on contacts the heatsink. 4. do not put solder mask on the backside of the pcb in the region where the board contacts the heatsink. 5. rf trace width depends upon the pcb material and construction. 6. use 1 oz. copper minimum.
p ower amplifier RNP04006-A1 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 6 / 6 version 1.0 revision history part number release date version modification data sheet status RNP04006-A1 2012.9.28 1.0 - - rfhic corporation reserves the right to make changes to any prod ucts herein or to discontinue any product at any time without n otice. while product specifications have been thoroughly examined for reliability, rfhic corporation strongly recommends buy ers to verify that the information they are using is accurat e before ordering. rfhic corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including wi thout limitation consequential or incidental damages. rfhic products are not intended for use in life support equipment or application where malfunction of the product can be expect ed to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold rfhic corporat ion and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. sales, inquiries and support should be directed to the local au thorized geographic distributor for rfhic corporation. for custo mers in the us, please contact the us sales team at 919- 677-8780. for all other inquiries, please contact the international sales team at 82-31-250-5078.
|
